Help Center › Pyro Cage
Are the feet on the Riser Base supposed to be a little loose?
One of the common questions we get about our Riser Bases are if the feet should be a little loose. The simple answer is yes. The steel sheets that our products are cut from are made within a range of tolerances - some are a little thinner while...
Can I order just a Lid or Riser Base for my Pyro Cage?
Yes! We have those items listed separately at the links below: Lid for Small, Medium, and Large Pyro Cage Riser Base for the Small, Medium, and Large Pyro Cage If you need the Lid or Riser for an XXL Pyro Cage, please contact us at...
Can I use gasoline or other accelerants to start a fire?
No - you should never use an accelerant to start a fire in a Pyro Cage. We've got years of experience burning in these cages and have never found it necessary, either. The most important thing to getting a good, clean burn is to make sure that...
Will the Pyro Cage rust?
It's important to note that our Pyro Cages are cut from Mild Steel, and are not made from Stainless Steel. We made this decision very deliberately because we were able to make a burn cage replacement that was nearly 2x thicker than the competition...
Will the Pyro Cage warp?
All metal expands when heated. We have carefully designed the Pyro Cages to minimize the warpage that can result when the metal is hot, but it does happen to varying degrees. When burning organic material like limbs and leaves the effect is less...